Setting Auto Iso Range - Pentax WG-10 Operating Manual

• When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f (2592×1944)/
• When set to c (Digital SR), 9 (Green), C (Movie), or
(Underwater Movie) mode, only [AUTO] is available.
• When set to S (Fireworks) mode, the sensitivity is fixed at 80.
• When the shooting mode is set to
80-6400. Other sensitivities can also be selected.
Saving the Sensitivity setting 1p.149

Setting AUTO ISO Range

Set the sensitivity range when the sensitivity is set to AUTO.
The sensitivity can be set to 80-100, 80-200, 80-400, 80-800, and 80-1600.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AUTO ISO
Range].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select the sensitivity
adjustment range.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
When the Sensitivity is set to 80 or 100 and Highlight Correction is set to
O (On), the setting changes to 160. The setting returns when Highlight
Correction is set to P (Off).
(2592×1464).
(Report), the AUTO is fixed at
Rec. Mode
Sensitivity
AUTO ISO Range
EV Compensation
Movie
D-Range Setting
Pixel Track SR
Cancel
MENU
3
2/4
AUTO
ISO80-100
ISO80-200
ISO80-400
ISO80-800
ISO80-1600
OK
OK
123