Setting The World Time - Pentax WG-10 Operating Manual

Checking the Alarm
1
Use the four-way controller (23) to select [Alarm] on
the [W Setting] menu.
Check that [Alarm] is set to O (On).
2
Press the four-way controller
(5).
The Alarm screen appears.
Check the alarm frequency and time.
3
Press the 3 button twice.
The camera returns to A mode or Q mode.
Turning the Alarm Off
The Clock mode screen appears and the
alarm rings for one minute when the set
time is reached while the camera is turned
off.
You can stop the alarm by pressing any
button on the camera while the alarm is
ringing.
• The alarm will not ring if the camera is on when the set time is reached.
• Even if an alarm is set, the alarm will not ring while interval shooting is
being performed.

Setting the World Time

The date and time selected in "Setting the Date and Time" (p.49) and
"Changing the Date and Time" (p.217) serve as the W ( Hometown) date
and time. By using the world time function, you can display the time in a
city other than the Hometown (X Destination). This is useful when
taking pictures in a different time zone.
Alarm 14:14
Alarm
Once
Time 14:25
Settings complete
Cancel
MENU
WED
7
221