Pentax WG-10 Operating Manual page 115

8
Press the 3 button twice.
The camera returns to capture mode.
• In C (Movie),
modes, W cannot be selected.
• In S (Fireworks), 9 (Green) and b (Auto Picture) modes, the
focusing area is fixed at J.
Setting the Auto Macro
When [Auto Macro] is on, the focus is adjusted to the macro range
(distance to the subject is 10 cm to 60 cm) as necessary, even if the
focus mode setting is AF (Standard).
When it is off and the focus mode is set to Standard (=), the AF operates
only in the standard range, and focusing is not done in the macro range.
When the focus mode is set to Macro or 1cm Macro, the focus is only
adjusted in the respective macro range and is not done in the standard
range.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AF Setting].
3
Press the four-way controller (5).
The [AF Setting] screen appears.
4
Use the four-way controller
(23) to select [Auto Macro].
5
Use the four-way controller (45) to select [O (On)/P (Off)].
The setting is saved.
6
Press the 3 button twice.
The camera returns to capture mode.
(Underwater Movie) and N (Frame Composite)
AF Setting
Focusing Area
Auto Macro
Focus Assist
MENU
3
113