Setting The Sensitivity - Pentax WG-10 Operating Manual

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
The sensitivity is automatically adjusted by the camera.
AUTO
(Default value: sensitivity 80-800)
80
100
200
400
800
3
1600
3200
6400
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to change the
sensitivity.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
122
The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected
by noise.
Rec. Mode 2/4
AUTO
80
Sensitivity
100
AUTO ISO Range
200
EV Compensation
400
Movie
D-Range Setting
Pixel Track SR
Cancel
MENU
OK
OK