Taking Pictures In Digital Microscope Mode - Pentax WG-10 Operating Manual

5
Press the 4 button.
The selected icon appears and the
camera returns to capture status.
6
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
3
7
Press the shutter release button fully.
The picture is taken.

Taking Pictures in Digital Microscope Mode

In the Digital Microscope mode, you can take pictures of objects as close
as 1 cm, also because the macro lights around the lens are always
lighted, you can take minute pictures of text, the veins of leaves, or
specimens of tiny insects etc.
• The number of recorded pixels is fixed at h (1920×1080).
• The focus mode is fixed at
• The default setting is O (On) for Pixel Track SR.
• j (Continuous Shooting) /c (Burst Shooting)/l (Auto Bracketing)
cannot be selected.
• The flash does not discharge in this mode.
• The Face Detection function and the Blink Detection function are
turned off.
• You can change the information display only between the normal and
No Info displays.
• The illumination of the macro lights may be uneven or insufficient
depending on the shooting conditions.
1
Press four-way controller (3) in A mode.
2
Use the four-way controller (2345) to select
(Digital Microscope).
90
38
(1cm Macro).