Setting The Sensitivity - Pentax OPTIO S5N Operating Manual

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
4
The camera sets the sensitivity automatically.
AUTO
80
• The lower the sensitivity, the sharper the image and the less noise. The
100
• The higher the sensitivity, the faster the shutter speed in low light
200
400
1
Press the MENU button in Capture mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to
select [Sensitivity].
3
Press the four-way controller (5).
The pull-down menu appears.
4
Use the four-way controller (23) to
change the sensitivity.
5
Press the shutter release button
halfway.
The camera is ready to take the picture.
84
shutter speed will be slower in low light conditions.
conditions to reduce camera shake, but the image may be affected by
noise.
Saving the Sensitivity
5
MENU
2, 3, 4
1
p.95
1
Rec. Mode
Recorded Pixels 5
M
Quality Level
White Balance AWB
Focusing Area
AE Metering
Sensitivity AUTO
Exit
MENU
Rec. Mode
Recorded Pixels 5
M
Quality Level
White Balance AWB
Focusing Area
AE Metering
Sensitivity
AUTO
Exit
MENU
Rec. Mode
Recorded Pixels 5
M
Quality Level AUTO
White Balance AWB 80
Focusing Area 100
AE Metering 200
Sensitivity ISO AUTO 400
Cancel
MENU OK
OK