Signal Menu - Epson EB-1775W User Manual

List of Functions

Signal Menu

Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
You cannot make settings on the Signal menu when the source is USB
Display, USB, or LAN.
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)" p.27
Submenu
Auto Setup Set to On to automatically adjust the image to the optimum state
when the input signal changes.
Set to Auto to automatically identify the resolution of the input
Resolution
signal. If images are not projected correctly when set to Auto, for
example if some of the image is missing, adjust to Wide for wide
screens, or set to Normal for 4:3 or 5:4 screens depending on the
connected computer.
You can adjust computer images when vertical stripes appear in
Tracking
the images.
Function
Submenu
Sync. You can adjust computer images when flickering, fuzziness, or
interference appear in the images.
You can adjust the display position up, down, left, and right when
Position
a part of the image is missing so that the whole image is projected.
(This setting can only be adjusted when a component video or
Progressive
RGB video with an interlaced signal (480i/576i/1080i) is input.
This cannot be set when a digital RGB signal is input.)
g
Interlace (i) signal is converted to Progressive
conversion)
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: Ideal for movies, CG, and animation.
(This cannot be set when a digital RGB signal is input, or when an
Noise Reduction
interlace signal is being displayed when Progressive is set to
Off.)
Smoothes out rough images. There are two modes. Select your
favorite setting. It is recommended that this is set to Off when
viewing image sources in which noise is very low, such as for
DVDs.
When the projector's HDMI port is connected to a DVD player,
HDMI Video
the projector's video range is set according to the DVD player's
Range
(EB-1775W/ video range setting.
EB-1770W/
EB-1760W only)
Input Signal You can select the input signal from the Computer port.
If set to Auto, the input signal is set automatically according to
the connected equipment.
If colors do not appear correctly when set to Auto, select the
appropriate signal according to the connected equipment.
You can select the input signal from the Video port. If this is set to
Video Signal
Auto, video signals are recognized automatically. If interference
appears in the image or a problem occurs such as no image is
being projected when set to Auto, select the appropriate signal
depending on the connected equipment.
71
Function
g
(p). (IP