Info Menu (Display Only); Reset Menu - Epson EB-1775W User Manual

List of Functions

Info Menu (Display Only)

Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)" p.27
Submenu
Lamp Hours You can display the cumulative lamp operating time
When it reaches the lamp warning time, the characters are
displayed in yellow.
Source You can display the source name for the connected
equipment currently being projected.
You can display the content of Input Signal set in the
Input Signal
Signal menu according to the source.
You can display the resolution.
Resolution
Function
*
.
Submenu
Video Signal You can display the settings for Video Signal in the Signal
menu.
You can display the refresh rate
Refresh Rate
You can display the image signal information.
Sync Info
This information may be needed if service is required.
This is information about errors that have occurred on the
Status
projector.
This information may be needed if service is required.
Displays the projector's serial number.
Serial Number
Displays the application error log.
Event ID
(EB-1775W/
s "About Event ID (EB-1775W/EB-1770W/EB-1760W
EB-1770W/
Only)" p.116
EB-1760W only)
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.

Reset Menu

84
Function
g
.