Extended Menu - Epson EB-1775W User Manual

List of Functions
Submenu
Test Pattern You can display a test pattern to adjust the projection without
connecting other equipment when you set up the projector.
While the test pattern is displayed, you can adjust keystone,
zoom, and focus.
To cancel the test pattern, press the [Esc] button on the remote
control or the control panel.
Reset You can reset all adjustment values on the Settings menu to their
default settings, except for User Button.
See the following to return all menu items to their default
settings.
s "Reset Menu"

Extended Menu

Function
p.84
Submenu
Display You can make settings related to the projector's display.
Messages: When set to Off, the following items will not be
displayed.
The name of the current selection when changing the
source, color mode, or aspect ratio; a message when no
image signal is input; warnings such as the High Temp
Warning.
Display Background
to Black, Blue, or Logo when no image signal is available.
Startup Screen *1
when projection starts.
*1 : You can set the screen displayed when the
A/V Mute
remote control's [A/V Mute] button is pressed to Black,
Blue, or Logo.
*1 You can change the user's logo that is displayed as a
User's Logo
background during Display Background, A/V Mute, and so
on.
s "Saving a User's Logo"
Select from one of the following projection methods
Projection
depending on how the projector is installed.
Front, Front/Ceiling, Rear, and Rear/Ceiling
You can change the setting as follows by pressing down
the [A/V Mute] button on the remote control for about five
seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
s "Installation Methods"
Function
*1 : You can set the screen background
: Set to On to display the User's Logo
p.60
p.19
74