I Want To Change The Language For Messages And Menus; Email Is Not Received Even If A Problem Occurs In The Projector (Eb-1775W/Eb-1770W/Eb-1760W Only) - Epson EB-1775W User Manual

Problem Solving
Check
Are the batteries dead or have the batteries been inserted correctly? Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary.
Are the remote control ID and the projector ID matched?

I want to change the language for messages and menus

Check
Change the Language setting.

Email is not received even if a problem occurs in the projector (EB-1775W/EB-1770W/EB-1760W only)

Check
Is Standby Mode set to Communication On?
Did a fatal abnormality occur and the projector come to a sudden
stop?
Is power being supplied to the projector?
Is Mail Notification function set correctly in the Configuration
menu?
s "Replacing the remote control batteries"
Make sure the ID for the projector you want to operate and the ID for the remote control match. To operate all projectors
by remote control regardless of the ID setting, set the remote control ID to "0".
s "Setting the remote control ID" p.57
Adjust the Language setting from the Configuration menu.
s Extended - Language p.74
To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.
s Extended - Standby Mode p.74
When the projector comes to a sudden stop, email cannot be sent.
If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.
Epson Projector Contact List
s
Check that your electrical outlet or power source is functioning correctly.
An error notification email is sent according to the Mail settings in the Configuration menu. Check if it is set correctly.
s"Mail menu" p.82
Remedy
p.17
Remedy
Remedy
99