Image Colors Are Not Right - Epson EB-1775W User Manual

Problem Solving
Check
Is the computer set for dual display?
(Only when projecting computer images)
Is the correct resolution selected?
(Only when projecting computer images)

Image colors are not right

Check
Do the input signal settings match the signals from the connected
device?
Is the image brightness adjusted correctly?
Are the cables connected correctly?
g
Is the contrast adjusted correctly?
Is the color adjustment set correctly?
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the
computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.
s Computer video driver documentation
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.121
s Computer's documentation
Change the following settings according to the signal for the connected equipment.
• When image is from a device connected to the Computer port
s Signal - Input Signal p.71
• When image is from a device connected to the Video port
s Signal - Video Signal p.71
Adjust the Brightness setting from the Configuration menu.
s Image - Brightness p.70
Check that all the cables required for projection are securely connected.
s "Connecting Equipment" p.21
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.70
Adjust the Color Adjustment setting from the Configuration menu.
s Image - Color Adjustment p.70
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.70
Remedy
Remedy
96