General Setup - Brother HL-L8350CDW User Manual

General Information

General Setup

Submenu
Local Language
Ecology
Panel Control
Setting Lock
Interface
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
- English* / Français...
On / Off*
Toner Save
0 / 1 / 2 / 3* / 4 / 5 / ... Min
Sleep Time
On / Off*
Quiet Mode
Off* / 1 hour / 2 hours /
Auto Power Off
4 hours / 8 hours
0.1* / 0.4 / 0.6 / 0.8 /
Button Repeat
1.0 / 1.4 / 1.8 / 2.0 Sec
Level1* / Level2 / ... /
Message Scroll
Level10
LCD Contrast -nnonn+
On* / Off
Auto Online
- On / Off*
Auto* / USB / Network
Select
1 / 2 / 3 / 4 / 5* / ... / 99Sec
Auto IF Time
Level 1 / 2 / 3 / 4* / ... / 7
Input Buffer
Descriptions
Select the LCD language for your
country.
Increases the page yield of the toner
cartridge.
Set the time to return to Power Save
mode.
Decreases printing noise.
Sets the number of hours that the
machine will remain in Deep Sleep
mode before going into Power Off
mode. Choose Off if you do not
want the machine to go into Power
Off mode.
Sets the time for the LCD message
to change when holding a or b at
intervals.
Sets the time in seconds that an LCD
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
Adjusts the contrast of the LCD.
Set the machine to return to Ready
mode after it has been idle for 30
seconds. If you select Off, the
machine cannot receive print jobs if it
has been left in Menu mode.
Turn the lock panel settings On or
Off by using the password.
Choose the interface to use.
If you select Auto, the machine
changes the interface to USB or
Ethernet depending on which
interface is receiving data.
You must set the time-out period for
the auto interface selection.
Increases or decreases the input
buffer capacity.
3
92