Color Correction - Brother HL-L8350CDW User Manual

General Information
Network for HL-L8350CDW and HL-L8350CDWT (continued)
Submenu 1 Submenu 2
Network Reset Restores all network settings of the internal print server to the factory settings.
The factory settings are shown in Bold with an asterisk.
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will
be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address
from the machine's control panel.
Reset Menu
Type of Reset
Network
Factory Reset
The factory settings are shown in Bold with an asterisk.

Color Correction

Submenu Menu Selections
Calibration Calibrate
Reset
-
Registration
-
Auto Correction
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Description
Restores all network settings of the internal print server to the factory settings.
Resets the machine and restores the printer settings (including command settings) to the
factory settings.
Options
a Yes b No
a Reset b Exit
a Yes b No
On* / Off
Descriptions
Descriptions
Performs a calibration to check and correct
the colors.
Set the calibration parameters back to the
default settings.
Aligns the print position of each color.
Sets the machine to perform Color
Calibration and Registration automatically.
3
101