Brother HL-L8350CDW User Manual page 101

General Information
Print Menu (continued)
Submenu Menu Selections
HP LaserJet Symbol Set
(Continued)
Table Print
Auto LF
Auto CR
Auto WRAP
Auto SKIP
Left Margin
Right Margin
Top Margin
Bottom Margin
Lines
The factory settings are shown in Bold with an asterisk.
Options
PC-8* / PC-8 D/N / ...
-
On / Off*
On / Off*
On / Off*
On* / Off
##
##
#.##
#.##
###
Descriptions
Sets the symbol set or the character
set.
Prints the code table.
If Change Emulation appears on
the LCD, select Auto or HP
LaserJet in Emulation of the
see
Print Menu ( page 93).
ON: CR i CR+LF, OFF: CR i CR
ON: LF i LF+CR, FF i FF+CR, or
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i VT
Chooses whether a line feed and
carriage return will happen when the
machine reaches the right margin.
Chooses whether a line feed and
carriage return will happen when the
carriage position reaches the bottom
margin.
Sets the left margin at column 0 to 70
columns at 1 cpi. The default setting
is 0 cpi.
Sets the right margin at column 10 to
80 columns at 1 cpi. The default
setting is 80 cpi (Letter).
Sets the top margin at a distance
from the top edge of the paper: 0.00,
0.33, 0.50, 1.00, 1.50 or 2.00 inches.
The default setting is 0.50 inches.
Sets the bottom margin at a distance
from the bottom edge of the paper:
0.00, 0.33, 0.50, 1.00, 1.50 or
2.00 inches. The default setting is
0.50 inches.
Sets the number of lines on each
page from 5 to 128 lines. The default
setting is 60 lines (Letter).
3
94