Saturation Col; Data Field; Data Background; Text Comments - FLIR ThermaCAM PM575 Operator's Manual

[5.5.4.2.4 — Saturation col.]
5.5.4.2.4

Saturation col.

Saturation colour is an on/off function. If On is selected the areas that contain
temperatures outside the present level/span settings are coloured with the satura-
tion colours. The saturation colours contain an »overflow« colour and an »under-
flow« colour.
There is also a third red saturation colour that marks everything saturated by the
detector indicating that the range should probably be changed.
5.5.4.2.5

Data field

This parameter determines the amount of data/information that will be shown on
the screen. There are four levels: Reduced, Normal, Extended and None.
Figure 5.21 Extended data presentation.
In Reduced mode, only the lower line is displayed. In Normal mode the lower and
middle lines are displayed. In Extended mode all three lines are displayed.
• The lower line contains information on the date, time, emissivity and zoom factor.
• The middle line contains information on filter setting (optional) and lenses. If no
filter is enabled, the text Filt = NOF is displayed. If a high temperature filter is
enabled, the text Filt = AP1 is displayed. The lense that is currently being used
is indicated as FOV 12, FOV 24 or FOV 45¸ e.g. 12°, 24° and 45° field of view,
respectively. In this line the selected temperature range is also displayed, i.e.
35–1000 °C (95–1832 °F) or -40–350 °C (-40–662 °F).
• The upper line contains information on the current directory, ambient tempera-
ture, relative humidity and object distance.
5.5.4.2.6

Data background

The background of the data can be selected as Transparent or Solid. If Transpar-
ent is selected, the data fields are displayed using the infrared image as a back-
ground. If Solid is selected, the data fields are displayed against a near-white
background.
5.5.4.2.7

Text comments

The text comments option can be selected as None, Value only and Label & value.
If Value only is selected, the text comments at the bottom of the screen show only
the user-defined values that the operator has selected when the text comments
were created, e.g. recommendations for repair. If Label & value is selected, both
38 ThermaCAM™ PM575/595 Operator's Manual