Delete Image - FLIR ThermaCAM PM575 Operator's Manual

[5.5.1.6 — Delete image...]
comments is stored on the PC-card (*.tcf). These text comments can be created
and edited in AGEMA™ Report PC software. See the software Operator's Manual
for further information on creating and editing text comments.
To add a text comment to an image, choose Text comments in the File menu. A
dialog box with multiple choices of text comments appears on the screen. The
choice in each dialog box is confirmed by highlighting the comment and pressing
↵ . This also brings up the next dialog box. Even though only one choice can be
made in a maximium of four different dialog boxes, the number of dialog boxes may
exceed that number. Pressing ↵ in the last dialog box confirms the complete text
comment. Pressing S in any particular dialog box saves that comment and cancels
the following dialog boxes.
N.B. – Text comments can only be made if IMG only or IMG and BMP is selected
in the Setup – Save options dialog box (Analysis → Save options). If BMP only is
selected, no text comments can be made.
If the option Label & value or Value is chosen in the Setup → Image → Text com-
ments menu, the text comments appear above the data presentation field at the
bottom of the screen. The suffix T is also added to the saved image, to indicate
that a text comment is attached to the file.
5.5.1.6

Delete image...

This function is used to delete previously saved images from the disk. The function
brings up a control bar showing the name of the image being displayed and the
directory in which it is stored. To select another image to be deleted move the joy-
stick up and down to change the selected image from the directory.
Figure 5.15 Delete Image control bar.
• To change the directory move the joystick to the right. The different directories
can then be selected by moving the joystick up or down.
• To delete an image, select Del Image and press ↵ . The image will be deleted
after confirming Yes and pressing ↵ in the confirmation dialog box.
If the directory is empty it is possible to delete the directory. The dialog box item
Del Image is changed to Del Dir. Deleting the directory is made in the same way
as deleting an image (see above).
28 ThermaCAM™ PM575/595 Operator's Manual