Tracks List Section - Merging Pyramix User Manual

Fields
Name
Name of the PQ Marker. When the markers are automatically created with the function "CD Mark Group", the stop
marker gets the same name as the start marker + a Stop suffix at the end. The " * " tells you that this marker was
auto generated.
# (Number)
(Read only) Number of the PQ Marker. The stop marker has the same number as the start. The index markers begin
at 2 then Inc... This is a Read only property; it depends on the position of the marker in relation to the others.
Type
Type of the Marker.
Time
Time position of the Marker.
Offset
Offset of the Marker. Grayed out when offset is disabled.
Use Offset
Enable or disable the Offset of a marker.

Tracks List Section

The top pane is the CD Tracks List which enables viewing and editing the content of the CD; by track. All modifi-
cations applied here automatically affect your edit. For example, if you modify a track pause from 4 to 6 sec-
onds, all the Clips (from the first one in the selected track to the last Clip of the last track), markers and automation
will be rippled to the right to add 2 seconds to the pause.
All operations can be undone.
The fields are:
Name
Name of the CD Track
# (Number)
Number of the Track. Click on the Value to display a drop-down list with all available track position numbers, then
you can select a new location for the track (E.g. Send track 9 to 2).
Pause
Pause of the CD Track: Time between the start of the track and the stop of the previous one. The pause of the first
track is always 0 (the 2 second pause required by the RED Book standard are automatically added for you in the
final TOC) except in the case of a Ghost track (see the Ghost Track section for more detail).
Start
Start of the CD Track in the Timeline. Modify this value to ripple the track and all the tracks after.
End
Stop of the CD Track in the Timeline. Modify this value to ripple all the tracks after (performs a similar function to
Length ).
Length
Length of the CD Track. Modify this value to increase or decrease the length of the track and ripple all the tracks
after.
Start Offset
Negative Offset for the start marker of the track.
Use Offset Click in the field to toggle No or Yes.
CD/SACD Mastering and Album Production : CD/SACD Tab Window 25 - 490