Merging Pyramix User Manual page 368

list, choose the bit depth/word length from the Media Wordlength combo box. The Suffix with Bus Name
option will create files named like:
Terminator_Final-M&E-Stem1-L.wav
Terminator_Final-M&E-Stem1-C.wav
Terminator_Final-M&E-Stem1-R.wav
Note: These settings are completely independent of the settings for Recording and Render.
4. In the Record section, choose to export the Whole composition , or the area between the In and Out Markers
with Between Marks or a Selection made previously by clicking the appropriate radio button.
5. Mix Source - Choose the appropriate output bus(es) as the source for the exported file. All output buses con-
figured in your Mixer will be available in the Mix Source list box.
Note: The names displayed will correspond to the labels in the mixer strips.
6. Mix Down begins the process.
Stop pops-up a Stop Record? confirm dialog. If you click Yes the recording stops at the point where you
clicked and is retained up to that point. The Mix Down dialog is closed.
Abort pop-ups an Abort Record? confirm dialog. If you click Yes the recording is stopped at that point and
discarded. The Mix Down dialog is closed.
Options
Processing
Real Time
SRC and ReDithering
Post-Processing
Keep in default library When checked the resultant mixed down file(s) will be placed in the Default Library
Place in timeline
Place in VCube
Controllers
Offline Controllers
Notes on 'Place in VCube'
The following notes apply when VCube is running in the same machine as Pyramix, OR when VCube is running on
a different machine and it's network name has been properly set in :
Pyramix > All Settings > Remote Control > Virtual Transport > VCube Options > Associated VCube network
name .
(For a PyraCube , I.e. a Pyramix & VCube combo system, the associated VCube network name must remain blank)
Important! If using the Post-Processing Place in VCube function with separate standalone machines.
I.e. a Pyramix and a VCube the Mix Down Destination Folder must be mounted as a network path, e.g.
\\server\sharedisk\folder\file.pmf. The files must be accessible from both machines using the same net-
work name.
Typically the share name of a disk can be seen differently from both machines if not set correctly, e.g. one
can see e:\media\file and the other see \\machine\shared\media\file in such case Pyramix cannot trans-
late the name for the VCube.
When checked the Mix Down will take place in Real Time
When checked the settings shown in the button below come into play.
Clicking the button opens the SRC Output Settings Properties dialog. Please
see: Properties... on page 71
When checked the resultant mixed down file(s) will be placed in the Timeline
When checked the resultant mixed down file(s) will be placed in new Tracks in the
VCube Timeline automatically. All pre-existing audio Tracks are removed. See also
below.
When checked Hardware Controllers will be switched Offline automatically for the
duration of the Mix Down. If the box is left unchecked it is possible to use the Hard-
ware Controller for changing Monitor volume etc. or to fade out.
Project Processes : Mixing Down Projects 17 - 368