Table of Contents
Advertisement
User's Manual
6. Telnet Interface
VSM-I-A matrices also feature IP based Telnet interface (command line on port 6324)
to communicate and control the matrix much the same way as through the RS-232
serial port. Only one (1) Telnet client is allowed at any given time, and if a new Telnet
connection is made, the old connection will be closed. Telnet connection timeout is set
to infinity or until user closes connection. Telnet authentication depends on
authentication status of web interface. If authentication is enabled, password will be
same as what used for web interface. User can also disable telnet interface from web
interface.
Following is an example making a Telnet TCP socket connection to the matrix using
Putty (an open source telnet client).
Figure-15 Putty client configuration
6.1 Telnet Interface Commands
Telnet interface uses same commands as VSM serial (RS232) interface.
22
Advertisement
Table of Contents
