Special Commands; Error Responses - Hall Research Technologies VSM-A-4-4 User Manual

User's Manual

4.4 Special Commands

Command:
Response:
Factory Default command will clear all audio/video ties and
Notice
presets. The units with IP interface have a slightly different
response to this command. Please see section 5.3 for further details
Command:
Response:
Command:
Response:
Notice The 4x4 VSM matrices equipped with IP Port have additional Serial
Commands to change IP address parameters. Please refer section
5.3 IP Specific Serial Commands for further info

4.5 Error Responses

ERR1«
ERR2«
14
FD«
FD«
FW«
FWx.y«
ST«
PW1«
CV1,m« CV2,m« CV3,m« CV4,m«
CA1,m« CA2,m« CA3,m« CA4,m«
Command is not recognized, has invalid parameter or wrong syntax
The only valid command while power is off is Power Status query (PW«), all
other commands issued while power is off will result in this error message
Stands for Recall Factory Defaults
Stands for Firmware Version
Stands for Status request