4. Locations and Functions
4-1. CCU
4-2. HEAD
1
12P connector
(For Camera Head)
2 Video output connector
(BNC connector)
3 SW1 switch
4 6-pin Multi connector
5 GAIN
6 12P Multi connector
7 Screw holes for Tripod mount plate : To fix tripod mount plate (optional) on camera
8 CCD sensor
9 Camera head mount
10 Camera head connector
CV-M530/531
: To connect camera head with camera control unit
: To output video VS1.0Vp-p
: To set shutter speed and function modes
: Output WEN/EEN signal and input external trigger pulse, etc.
: To adjust gain level
: Input DC+12V power and input/output of HD/VD signal, etc.
: 1/2" Hyper HAD Interline transfer CCD sensor
: To mount camera head
: To connect camera head with cable
- 5 -