Table 5-4. Ide Configuration Menu - Supermicro SBI-7126T-SH User Manual

SBI-7126T-SH Blade Module User's Manual
Table 5-3. CPU and Clock Configuration Sub-menu (Continued)
Menu Option
Active Processor
Cores
A20M
Intel (R) Speed Step
(TM) tech
Intel (R) TurboMode
Tech
Intel (R) C-STATE
tech
C3 State
C6 State
C State package limit
setting
C1 Auto Demotion
C3 Auto Demotion
Spread Spectrum
Mode
Menu Option
SATA#1
Configuration
Configure SATA#1 as
SATA#2
Configuration
Primary/Secondary/
Third/Fourth IDE
Master/Slave
Type
LBA/Large Mode
Description
This setting specifies the number of cores to enable in each processor package.
Options include All, 1 or 2.
Legacy OSes and APs may need this setting enabled. Options include E
and Disabled.
This setting allows you to E
This setting allows the processor cores to run faster than the marked frequency
in specific conditions. Options are either Enabled or D
This setting allows you to E
This setting allows you to select the Nehalem C state action as either D
ACPI C2 or ACPI C3.
This setting allows you to select the Nehalem C state action as either Enabled or
D .
ISABLED
The selected option for this setting will program into C State package limit
register. Options include Auto, C1, C3, C6 and C7.
When enabled, the CPU will conditionally demote C3/C6/C7 requests to C1
based on uncore auto-demote information. Options include Enabled and
D .
ISABLED
When enabled, the CPU will conditionally demote C6/C7 requests to C3 based
on uncore auto-demote information. Options include Enabled and D
This setting allows you to E
system.

Table 5-4. IDE Configuration Menu

Description
If Compatible is selected, this sets SATA#1 to legacy compatibility mode.
Selecting Enhanced sets SATA#1 to native SATA mode. The options are
, C and Enhanced.
OMPATIBLE
This setting allows you to select the drive type for SATA#1. The options are IDE,
and AHCI. Choosing the RAID or AHCI changes which further menu options
appear on the screen.
Selecting Enhanced sets SATA#2 to native SATA mode. The options are
D and Enhanced.
ISABLED
This submenu contains IDE Master/Slave settings.
This setting specifies the type of device connected to the system. Options
include Auto, CD/DVD and ARMD.
This setting allows you to enable/disable LBA Mode. Options include D
and Auto, which enables LBA mode if the device supports it and the device is
not already formatted with LBA mode disabled.
or Disable GV3.
NABLE
or Disable the CPU idle setting at C2/C3/C4.
NABLE
or Disable Spread Spectrum Mode in your
NABLE
5-6
NABLED
.
ISABLED
ISABLED
.
ISABLED
ISABLED
,