Table of Contents
Advertisement
SuperBlade SBI-6119R-C3N/T3N User's Manual
Quiet Boot
When Disabled the BIOS displays normal POST messages. When Enabled the BIOS displays
an OEM Logo instead of POST messages.
Bootup NUM-Lock State
This setting selects the Power-On state for Numlock. Options include On or Off.
Option ROM Messages
Use this setting to set the display mode for Option ROM to either Force BIOS or Keep Current.
Interrupt 19 Trap Response
This sets the BIOS reaction on INT19 trapping by the Option ROM. Options include Immediate
to execute the trap right away, or Postponed to execute the trap during legacy boot.
Port 61h Bit-4 Emulation
Enables or disables emulation of Port 61h bit-4 toggling in SMM.
Wait for 'F1' If Error
When enabled, the system will wait for the F1 key to be pressed if an error occurs. Options
are Enabled or Disabled.
Re-try Boot
Use this setting to specify the Re-try Boot option to use. Options include Disabled, Legacy
Boot or EFI Boot.
Watch Dog Function
This setting allows the system to restart when it is not active more than 5 minutes. Option
include Enabled and Disabled.
Power Button Function
This setting specifies the power button's function when pressed. Option include 4 Seconds
Override or Instant Off.
Restore on AC Power Loss
Use this to select the Restore on AC Power Loss function. Options include Power On, Stay
Off and Last State.
PCH-FW Configuration Sub-menu
PCH-FW Configuration Information
This section shows static information on the PCH-FW configuration.
Me FW Image Re-Flash
Use this setting to Enable or Disable Me FW Image the Re-flash function.
38
Advertisement
Table of Contents
