English Svenska DEHUMIDIFIER Norsk MODEL MJ-E14CG-S1-SWE Dansk INSTRUCTION MANUAL Suomi Features Table of Contents page Drying Inside Before using the unit Air Filter and Silver Ion Sterilizing and Deodorizing Recommended Ways of Using the Unit Depending on Purpose ······························ 2 Filter Frequently Asked Questions·····················...
Recommended Ways of Using the Unit Depending Combine operating mode and swing louvre function to get optimum results. Drying Lowering room humidity Preventing mold/ laundry When you don’t When you don’t When you want to When To prevent want to hang the know what set the humidity condensation...
on Purpose Frequently Asked Questions Why does the dehumidifier seem to collect less water in winter? To clean condensation the air A. When the temperature and humidity are low, the amount of water collected is To keep the inside There is no need for decreased.
Continuing to operate the unit may result in fire, electric shock, or malfunctions. This may result in fire and/or electric Contact your dealer or Mitsubishi Electric shock. Refer servicing to your dealer or Service Centre for consultation. Mitsubishi Electric Service Centre.
CAUTION Do not drain water continuously Do not cover the front or side if there is a possibility that air intakes or the air outlet temperature around the hose could with cloth, curtain, etc. drop to freezing point. This results in poor ventilation and Water inside the hose may freeze and may cause heat generation/fire.
Precautions (Cont.) Tips on Dehumidifying CAUTION Drain the water tank before use After emptying the tank, transport the unit by grasping the handle firmly. Refrain from opening Losing your footing while carrying doors/windows during operation the unit may cause personal injury or damage to the floor.
Names and Functions of Parts Front Control panel Silver ion filter 4·5 Supplied with unit. Set before use. Pre-filter Front panel Front Air Intake Do not block. Water tank 11·1 What is a silver ion filter? Tank lid 11·1 The silver ion filter has a two-layer construction consisting of a white particle filter and a blue air- Floating element freshener filter.
Names and Functions of Parts (Cont.) Control Panel Lamp Mode button Swing louvre button Current mode lights. For switching from one Sets swing louvre operating mode to another. direction or locks it into Selection button position. Humidity selection Switches modes.
Drying inside lamp Flashes when drying inside in progress. Drying inside button Activate/deactivates drying inside. Air purifier lamp Lights during air purifier only operation. Air purifier button Switches to air purifier only operation. Power lamp Lights when unit is ON.
Things to Be Aware of Before Using Your Setting the silver ion Room temperature may rise 2-4°C filter during operation The dehumidifier does not have a cooler function. The silver ion filter is supplied with the unit at time Due to heat produced during operation, the room temperature may rise 2–4°C.
Dehumidifier Inserting the water Plug the power cord into tank correctly the power socket Tank Lid Tank Lid Open the front door. Open the front door. Confirm that the lid Confirm that the lid is securely attached is securely attached to the water tank.
Turning the Unit ON and OFF To turn ON Press Reading the humidity display Power lamp lights. The mode is displayed. CURRENT indicates the Example The louvre opens automatically. current humidity. Current humidity range is between 30–80%. To start dehumidifying, select the desired mode. •...
Easy Operation The unit automatically monitors room temperature/humidity alleviating the necessity to make minor adjustments. Use EASY DEHUMIDIFYING for dehumidifying a room and INTELLIGENT LAUNDRY for drying clothes. Changes with every press Press Selected mode lamp lights. EASY DEHUMIDIFYING ...
Setting Modes LOW, MILDEW GUARD and LOW TEMP LOW mode is for when you want to leave the dehumidifier on. MILDEW GUARD mode suppresses mildew growth. LOW TEMP mode is for preventing condensation or when the room temperature is low. Changes with every press Press ...
AUTO AIR PURIFIER When you want to set the humidity level. To operate only the air purifier. Press Press Air purifier lamp lights. Frame appears around AUTO. The MODE button can also be used to select To return to the previous mode, press the air AUTO.
Using Louvre (how to read the swing monitor) The louvre can be made to swing. Select from the 4 possible settings to suit the purpose. Stop swing operation WIDE With each Press press of the button Starts swing operation. UPWARD ...
Drying Inside Operation The inside of the unit can be dried to suppress mildew growth on the cooler. On days the dehumidifier is used, drying inside is recommended. Automatic operation Manual operation To activate drying inside after every use. To activate drying inside by pressing a button. Press Press while the unit is on...
Using Timer OFF timer operation The OFF timer can be set for 1 to 9 hours. Set the timer when the power is switched on. To set To cancel Switch the power on. <When you want to turn the unit off>...
ON timer operation The ON timer can be set for 1 to 9 hours. Set the timer when the power is switched off. To set The following is an example of a display indicating AUTO dehumidifying (set to 60%), swing set to Switch the power off.
Using Child Lock Carrying the Unit To lock Pull the handle out, and grasp with a firm grip Press for 3 or more seconds. The child lock indicator lights up. The child lock is switched off when the power cord is unplugged. When the child lock is activated, the other switches are inoperable.
Draining The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 3.8 L) is full. Empty the tank. Remove the tank lid, and empty. Remove the water tank. Tank lid Open the front door. Floating element Do not remove or dismantle the float.
Continuous Drainage If a drain is available, the unit can continuously drain excess water by attaching a commercially available hose (internal diameter 15 mm). The unit can be operated for extensive periods without the need to empty the water tank. CAUTION Commercially available hose (ID 15 mm) Long enough to reach the drain.
Maintenance Do not use detergents, cleaning agents for heat exchange equipment, abrasive powders, chemically treated dusters, gasoline, benzene, thinners or other solvents, as they can damage the unit or the water tank, which may result in leakage. Cleaning Once every two weeks Water tank •...
Maintenance (Cont.) Once every three months Silver ion filter Soak in water the filter about once every three months. Remove the front panel and Dry the silver ion filter. pre-filter. Front panel Pre-filter Do not hang with pegs as this may damage the filter.
Replacement Storage and Parts Disposal The silver ion filter is a consumable item. Replace the filter when it becomes time for Storage replacement. After switching the unit off, leave for one day until Replacing the silver ion filter any water inside has had time to run off, then carry out the following steps.
Troubleshooting For the symptoms listed below, refer to the remedies listed right. Symptom Cause/Remedy Dehumidified air passes through heating coils causing it to warm The unit blows warm air (this unit is not a cooler). This is not a malfunction. Check to see if the temperature/humidity is low.
Symptom Cause/Remedy Check to see if the unit is on a slope or uneven surface. → Move to a sturdy even surface. The operating Check to see if the pre-filter is clogged. noise is loud/ → Clean according to the maintenance procedures. reverberates Operating the unit in small rooms or in tight spaces sometimes causes the sound to reverberate.
The dehumidifying capacity is a value obtained when the dehumidifier is continuously run at a room temperature of 30°C and humidity of 80%. It indicates the amount of dehumidification per day (24 hours). NOTE Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and This symbol mark is for components which can be recycled and reused.