Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Solo 160
Summary of Contents for Solo 160
- Page 1 160 /161 Instruction manual Motorised hedge Original instructions trimmer Important! Read this instruction manual carefully before first operation and strictly observe the safety regulations! 9 160 102 english 12/2008...
- Page 2 - ENGLISH - Motorised hedge trimmer 160 / 161 Symbols Instruction manual Original instructions The following symbols are used in this manual and on the product: Thoroughly read these operating Caution! Prior to operating the unit, please instructions before undertaking any read the owner’s manual carefully, and most...
-
Page 3: Table Of Contents
Index Page 1. Safety regulations ........................4 Correct use / General safety instructions Working clothes Fuelling When transporting the equipment Preparing the equipment for starting Starting Maintenance and repairs Working with the machine 2. Standard delivery ......................... 8 3. Control and function elements ..................... 8 4. -
Page 4: Safety Regulations
Safety regulations 1. Safety regulations 1.1 Correct use / General safety instructions Only use the motorised hedge trimmer to trim hedges, shrubs and bushes. Never use the hedge trimmer for any other purpose. (section 6.1 "Scope of Application") Read the operating instructions carefully before placing in service and keep them in a safe place. -
Page 5: Working Clothes
This clothing should be practically oriented to the application (for example a tight fitting work suit), but should not be confining. We recommend: SOLO forest and countryside work jacket EN 340 Part no: 99303000 + size (2[s] - 6[xxl]) SOLO Outdoor Knee-breeches Part no: 9902095 + size SOLO Outdoor dungarees Part no: 9902094 + size Never wear scarves, ties, jewellery or other items of clothing, which might get caught in the equipment, in brush or on branches. -
Page 6: Preparing The Equipment For Starting
Safety regulations 1.5 Preparing the equipment for starting Check the complete machine for operational safety. In addition to the information in the operating and maintenance instructions (chapter 7), implement the following checks: • The ON/OFF switch must have an easy action. •... - Page 7 Safety regulations • Work conscientiously, thoughtfully and calmly, and do not endanger third parties. - Pay attention to good visibility and lighting conditions. - Always remain within earshot of other people who can provide help in case of emergency. - Plan for timely work breaks. - Pay attention to possible hazards and take appropriate precautions.
-
Page 8: Standard Delivery
• Cutting blade protector • Tools: combination spanner (sparkplug, T25), T27 • 50 g SOLO gear grease for hedge trimmer (part no. 00 83 190) • Instruction manual, the EC declaration of conformity on a separate piece of paper 3. Control and function elements Fig. -
Page 9: Fuelling And Gear Lubrication
Top up with grease every 10 - 20 hours. We recommend the use of the 4.1 Fuel information SOLO gear grease for hedge trimmer (part no. 00 A high performance two-stroke engine 83 190). operated with a petrol:oil mixture (petrol + oil Fig. -
Page 10: Starting / Stopping The Engine
Starting / Stopping the engine 5. Starting / Stopping the engine Adjust choke (9) as follows: • Set the choke lever (9) to the closed position when the engine is cold. • Set the choke lever (9) to the open position 5.1 Preparing for starting, start settings when the engine is already warm. -
Page 11: Engine Will Not Start
Starting / Stopping the engine When the engine is running, first lift up the 5.4 Turning off the engine: hedge trimmer from the floor, then release the Release the throttle and set the ON/OFF switch to throttle safety catch and briefly press the throttle to position "0". -
Page 12: Using Your Power Hedge Trimmer
Using your power hedge trimmer 6. Using your power hedge trimmer Fig. 7 Before using your hedge trimmer, familiarise yourself with the operating and maintenance instructions, in particular regarding the cutter (chapter 7.1) and gear lubrication (chapter 7.3 / chapter 4.3). 6.1 Scope of Application Only use the motorised hedge trimmer to trim hedges, shrubs and bushes. -
Page 13: Decorative Cutting
Using your power hedge trimmer 6.3 Decorative cutting Fig. 8 The trapezoidal cutting pattern shown prevents the lower hedge area from loosing its foliage due to lack of light. Fig. 11 Fig. 10 Fig.10: Firstly, cut the hedge to the desired height. Cutting the top of the hedge Cuttings can be freed from the hedge by a slight Holding the shears at an angle (max. -
Page 14: Operating And Maintenance Instructions
To clean the blade after hedge trimming, we recommend the use of "SOLO Universal-Reiniger We recommend the use of the SOLO gear grease (Cleaner)" (Part no: 00 83 116). After a short for hedge trimmer (part no. 00 83 190). Top up with... -
Page 15: Air Filter Maintenance
Operating and maintenance instructions 7.4 Air Filter Maintenance 7.5 Carburettor adjustment Dirty air filters cause a reduction in engine The carburettor is adjusted at the factory for performance and increase fuel consumption with optimum performance. Subject to the place of use more pollutants in the exhaust gas. -
Page 16: Information About The Spark Plug
• If the electrodes have been heavily worn away, Reiniger (Cleaner)" (Part no: 00 83 116) and treat replace the spark plug immediately – otherwise with "SOLO maintenance and care oil" (Part no: after 100 hours run. 00 83 163). Never use grease. -
Page 17: Scheduled Maintenance
Operating and maintenance instructions 7.9 Scheduled maintenance The following information is based on standard operating conditions. For special conditions, such as prolonged daily use, the recommended maintenance intervals should be reduced accordingly. Implement all maintenance jobs regularly. If required, authorise a specialist service centre to maintain the machine for you. -
Page 18: Specification
Medium idling speed 2700 Fuel tank capacity 0,45 Fuel mix ratio: with " SOLO 2T engine oil " 1:50 (2%) with other two-stroke oils 1:25 (4%) Carburettor All-position diaphragm carburettor with primer and integrated fuel pump... -
Page 19: Accessories
Your emission control system includes parts such as the • Clutch carburetor, the ignition system, and the exhaust system. • Spark plug Where a warrantable condition exists, Solo will repair • Starter your small non-road power equipment engine at no cost • Cutting tools to you including diagnosis, parts, and labor. - Page 20 Made in Germany SOLO SOLO Postfach 60 01 52 P.O.Box 60 01 52 D 71050 Sindelfingen D 71050 Sindelfingen Germany Tel. 07031-301-0 Phone+49-7031-301-0 Fax 07031-301-130 +49-7031-301-149 info@solo-germany.com export@solo-germany.com...