Related Manuals for Solo 129HS
Summary of Contents for Solo 129HS
- Page 1 Instruction manual Important! Read this instruction manual carefully before first operation and strictly observe the safety regulations! 129HS Blade hedge trimmer 9 129 101 english 01/2006...
- Page 2 Preface Dear Customer, Congratulations for choosing this SOLO quality product. The SOLO blade hedge trimmer 129HS is a particularly ergonomically designed power tool with a modern, high-performance engine. This trimmer offers you a professional, easy to maintain layout. The proven technology used in the Nikasil- coated vertical cylinder 2-cycle engine guarantees high performance and low fuel consumption.
-
Page 3: Table Of Contents
Starting Engine will not start: Turning off the engine: 6. Adjusting the handle and mitre gear ... 10 7. Using your blade hedge trimmer ... 10 Scope of Application Correct operation of your blade hedge trimmer Decorative cutting 8. Operating and maintenance instructions... 12... -
Page 4: Safety Regulations
Safety regulations 1.1 General safety instructions Read the operating instructions carefully before placing in service and keep them in a safe place. Use this power tool with particular caution. Non-observance of safety instructions can lead to a risk to life. Also observe any regulations from your professional body. These operating instructions must always be available at the place of work. -
Page 5: Fuelling
1.3 Fuelling Petrol is very light and highly flammable. Keep away from open flames and never spill fuel. Do not smoke at the operating site or at and near the refuelling site! • Stop the engine prior to refuelling. • Let the engine cool down before refuelling - fire risk! •... -
Page 6: Working With The Machine
- Keep all body parts away from the blades. Always cut away from your body. - Always cut in an efficient and correct manner (see chapter 7.2 "Correct operation of your blade hedge trimmer "). - Never touch the ground with your running hedge trimmer. -
Page 7: Standard Delivery
• Blade hedge trimmer • Cutting blade protector • Shoulder strap • Tools: combination spanner and screw driver • Instruction manual Cutting blade and gear: Fig. 1 Fig. 1: 1 Cutting blade sheath 2 Cutting blades 3 Cutter gearbox 4 Angular gear... -
Page 8: Fuel Information
4. Fuelling 4.1 Fuel information A high performance two-stroke engine operated with a petrol:oil mixture (petrol + oil = fuel mixture) or with a special fuel mixture for two-stroke engines available from specialists powers this machine. The fuel mixture can be made up with standard lead- free petrol or with lead-free premium grade petrol. -
Page 9: Starting
5.3 Starting Observe the safety instructions when starting. Note: Your new brushcutter is, as standard, fitted with the "Easy-Start-System". This enables the engine to be started without major effort. By pulling on the starter cord – perhaps several times – a spring box is loaded inside the starter. -
Page 10: Adjusting The Handle And Mitre Gear
ENGLISH 7. Using your blade hedge trimmer 7.1 Scope of Application The blade hedge trimmer must only be used to trim hedges, shrubs and bushes. Never use the hedge trimmer for any other purpose. The maximum thickness of twigs and branches,... -
Page 11: Decorative Cutting
Trimming procedures Cut the hedge in several stages, if the hedge needs to be cut back a great deal. Between the passes, cut back thicker branches and twigs with pruning shears neiden. Fig. 10 Cutting the top of the hedge Holding the shears at an angle (max. -
Page 12: Operating And Maintenance Instructions
8. Operating and maintenance instructions The maintenance and the repair of modern machines as well as their safety-relevant assemblies require qualified specialised training and a workshop equipped with special tools and test equipment. Consequently the manufacturer recommends that all tasks not described in these operating instructions be carried out by a specialised workshop. -
Page 13: Carburettor Adjustment
Before opening the air filter, close the choke prevent dirt entering the carburettor. Turn air filter lid (22) clockwise (viewed onto the air filter lid), and remove the lid. Remove foam filter (27) from the lid and clean the area around the filter. -
Page 14: Information About The Silencer
disconnected from the high-tension ignition cable. A spark may cause a fire! Spark plugs with resistor (thermal value 200) are available in different brands under the following description: BOSCH WS6F CHAMPION RCJ-6Y or comparable. The correct electrode gap is 0.5 mm. Only use spark plugs, where the contact nut has been firmly fitted. -
Page 15: Scheduled Maintenance
8.9 Scheduled maintenance The following information is based on standard operating conditions. For special conditions, such as prolonged daily use, the recommended maintenance intervals should be reduced accordingly. Carburettor Air filter Spark plug Gearbox lubricant Blade Cooling air intake [casing apertures between the anti- vibration system (24) and the engine casing]... -
Page 16: Specification
Specification Engine type Engine capacity Bore / stroke Engine power Max. permissible speed no load with cutter Medium idling speed Fuel tank capacity with SOLO 2T engine oil Fuel mix ratio: with other two-stroke oils Carburettor Air filter Ignition Total cutting blade length/Effective cutting length mm Number of individual cutters top/lower blade Distance between individual cutters Blade stroke... -
Page 17: Accessories
“SOLO Universal-Reiniger” 500 ml SOLO maintenance and treatment oil spray can 300 ml SOLO gear grease for hedge trimmer Grease gun Gloves SOLO Fit SOLO leather forest boots SOLO protective helmet with face and ear protection SOLO forest and countryside... - Page 18 SOLO SOLO Postfach 60 01 52 P.O.Box 60 01 52 D 71050 Sindelfingen D 71050 Sindelfingen Germany Tel. 07031-301-0 Phone+49-7031-301-0 Fax 07031-130 +49-7031-149 info@solo-germany.com export@solo-germany.com Made in Germany...