Table of Contents
Advertisement
•
Work conscientiously, thoughtfully and calmly, and do not endanger third parties.
- Pay attention to good visibility and lighting conditions.
- Always remain within earshot of other people who can provide help in case of emergency.
- Plan for timely work breaks.
- Pay attention to possible hazards and take appropriate precautions. Be aware that wearing ear
defenders reduces the ability to perceive noise. This includes sounds alerting to danger such as
signals, shouts, etc. that can go unnoticed.
- Exercise caution when the ground is wet or covered in ice and snow, on overhangs, or uneven
terrain. There is an increased risk of slipping!
- Pay attention to the risk of stumbling and obstacles, such as tree roots and stumps, edges, etc. Pay
particular attention to safety when working on slopes.
- Before commencing work, check the working area for stones, broken glass, nails, wire or other solid
objects and remove such debris to prevent them being picked up and thrown out by the cutters.
- Always hold this power tool firmly in both hands, and ensure your safe and solid foothold.
- Keep all body parts away from the blades. Always cut away from your body.
- Always cut in an efficient and correct manner (see chapter 6.2 "Correct operation of your motorised
hedge trimmer").
- Never cut above shoulder height, at a distance from your body or while standing on a ladder. If
cutting at height is required, use a hydraulically operated cabin lift.
- Never touch the ground with your running hedge trimmer.
- Never use the hedge trimmer to lift away or move pieces of wood or similar materials.
- Only use the device with sharp and undamaged blades and avoid damaging the blade on foreign
objects.
•
Switch the engine off if the device behaves in any way unusually.
•
The cutter will run on for a short time when the throttle safety catch is held despite the throttle being
released and the engine being switched off. Ensure that the cutters have stopped completely before
putting the machine down.
•
Before touching the hedge trimmer, even if the blades have jammed or seized up, switch off the
engine and wait until the cutters have stopped moving. The cutting blades should only be handled
for cleaning purposes. Make sure that the engine is switched off and protective safety gloves are worn.
•
Never touch the silencer when it is still hot as this can lead to a risk of burning! Never place the hot
machine on dry grass or on flammable materials. The silencer emits tremendous heat (risk of fire).
•
Never work with a faulty silencer or without the silencer. This would create a danger to hearing and a
risk of burning.
First Aid
A first aid box should always be available on-site. Immediately replace any materials you have used:
Note:
Over exposing persons with circulatory problems to vibrations can lead to damage to their nervous system
or blood vessels. The following systems may occur from vibrations to fingers, hands or the wrists:
Numbness, itching, pain, twinges, changes to the colour of the skin or the skin itself. Seek medical advice
if you experience any of these symptoms.
Safety regulations
ENGLISH 7
Advertisement
Table of Contents
