Page 1
Instruction manual Electric trimmer Original instructions Important! Read this instruction manual carefully before first operation and strictly observe all safety regulations! 9 116 104 english 11/2009...
Page 2
- ENGLISH - Electric trimmer Symbols Instruction manual Original instructions The following symbols are used in this manual and on the product: Always handle this power tool with Caution! Prior to operating the unit, please particular care read the owner’s manual carefully, and most importantly, observe all safety rules.
Index ; Safety regulations Index Page 1. Safety regulations..........................3 Mains supply and extension cable Correct use / General safety instructions Working clothes When transporting the equipment Before connection to the mains supply Working with the machine Maintenance, cleaning and repairs 2.
Safety regulations 1.2 Correct use / General safety instructions The electric trimmer must only be used to cut grass, reeds, weeds and wild growth at ground level. The trimmer must not be used for any other purposes (see chapter 6.1 "Scope of Application"). Read the operating instructions carefully before taking this equipment into service and keep them in a safe place.
Safety regulations 1.5 Before connection to the mains supply Before taking the power tool into use, check it fully for perfect condition. • The ON/OFF switch must be able to move freely and must automatically return into the stop position. •...
Standard delivery ; Control and function elements 2. Standard delivery • Electric trimmer partially assembled; the following components are supplied separately and require assembly • Handle and all parts required to complete the assembly • Shoulder strap • Guard, Guard bar, line trimmer and all parts required to assemble the shield •...
Specification 4. Specification Motor type / Motor power Electric motor / 1000 Mains voltage / frequency V / Hz 230 AC / 50 Protection class II (double-insulated) Extension cable (accessory) DIN 57282/H07 RN-F Rated speed of the cutter 6500 - 7500 Drive shaft –...
Preparing the equipment for use 5. Preparing the equipment for use 5.2 Shield installation For shipping purposes, the trimmer is partly disassembled and has to be reassembled prior to Fig. 3 use. Only use the trimmer after it has been fully assembled.
Preparing the equipment for use 5.3 Cutter installation 5.4 Shoulder strap adjustment Before commencing work, adjust the shoulder Fig. 5 strap and handle according to the operator’s body size. Position the single shoulder strap over your l.h. shoulder, so that, after adjusting the strap length, the strap hook is located at your r.h.
Using your trimmer 6. Using your trimmer Fig. 10 6.1 Scope of Application Only use trimmers equipped with a nylon head for cutting grass – particularly suitable around obstacles - and for trimming light weeds and wild growth near ground level. The nylon head is particularly suitable for a soft cut, e.g.
Using your trimmer 6.4 Troubleshooting Fault Possible cause Remedy Motor will not start No power supply 1a.Check the mains supply and the extension cable. 1b. Check the mains socket (e. g. different equipment plugged in). Cutting tool jammed/blocked 2. Pull the mains plug and clear the cutting tool. The cutter does not rotate, Flexible shaft 1.
Operating and maintenance instructions 7. Operating and maintenance instructions (e.g. before you start working) whether grease is still visible. Your SOLO dealer workshop is happy to help you 7.1 General operating and maintenance in case of doubt. instructions The maintenance and the repair of modern machines as well as their safety-relevant 7.3 Cleaning...
Guarantee ; Parts subject to wear and tear 8. Guarantee The manufacturer guarantees trouble-free quality and will cover the cost of replacing parts which are found to be faulty in material or workmanship within the prescribed guarantee period after the date of purchase.
Page 14
SOLO SOLO Postfach 60 01 52 P.O.Box 60 01 52 D 71050 Sindelfingen D 71050 Sindelfingen Germany Tel. 07031-301-0 Phone+49-7031-301-0 Fax 07031-301-130 +49-7031-301-149 info@solo-germany.com export@solo-germany.com...
Need help?
Do you have a question about the 116 and is the answer not in the manual?
Questions and answers