Ip Access-List - Zte ZXR10 Command Manual

Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Interface Configuration
ip access-group-senior <acl-number | acl-name>{in | out}
no ip access-group-senior [<acl-number | acl-name>]{in |
out}
<acl-number >
<acl-name >
� This command supports layer-2 GEI, layer-2 FEI, layer-2 VLAN
and smartgroup interface.
� For ZXR10 T160G, this command is with out: acl-number can
be 1~349, 1000~1999, 2000~2999, 3000~3499.
This example describes how to use ACL1 in the egress of interface
gei_1/1, use ACL101 in the ingress of interface gei_1/1.
ZXR10(config)#interface gei_1/1
ZXR10(config-if)#ip access-group-senior 1 out
ZXR10(config-if)#ip access-group-senior 101 in
show access-list senior bound
show access-list senior vlan-bound

ip access-list

Use this command to enter access list configuration mode.
Global configuration
ip access-list {extended | standard}{number <acl-number>|
name <acl-name>| alias <acl-alias>}
extended
standard
<acl-number>
name <acl-name>
alias <acl-alias>
The alias must be configure for the specified acl before the use
of the ip access-list {extended | standard} alias <acl-alias>
command to enter ACL configuration mode.
� This example describes how to enter standard access list con-
figuration mode.
ZXR10(config)#ip access-list standard 1
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 ACL Configuration
ACL number
ACL name
Extended access control list
Standard access list
Its range is 1~99, 1000~1499 for the
standard list, and 100~199, 1500~1999 for
the extended list
Access list name
Access list alias
19