Zte ZXR10 Command Manual page 177

�
�
�
� This example describes how to enable the function of defending
Example
the DOS attack and set default parameters.
ZXR10(config-if)#port-upsend
� This example describes how to enable the function of defending
the DOS attack and set default parameters 100 6 10.
ZXR10(config-if)#port-upsend 100 6 10
� This example describes how to enable the function of defending
the DOS attack and set the sub_interface inheriting the port-
upsend attribute of the parent interface.
ZXR10(config-if)#port-upsend 100 6 10 all
� This example describes how to make the sub_interface never
inherit the port-upsend attribute of the parent interface.
ZXR10(config-subif)#port-upsend no-application
show run interface <interface_name>
Related
Commands
For some parent interfaces, the all option is added, such
as port-upsend [<packet><rcv_interval><close_interval
>][all]. When the all option is configured with the parent
interface, all sub-interfaces of the parent interface inherit
the port-upsend attribute configured on the parent inter-
face. The parent interfaces supporting the all option in-
clude: Ethernet interface, ATM interface and SmartGroup
interface.
For some sub-interfaces, the no-application option is
added, port-upsend {[<packet><rcv_interval><close_i
nterval>]|[no-application]}, when the no-application
option is configured on this sub-interface, this sub-inter-
face does not inherit the port-upsend attribute configured
on the parent interface . The sub-interfaces supporting the
no-application option include: Ethernet sub-interface,
ATM sub-interface and SmartGroup sub-interface.
There is no change for the POS, CE1, CP3, CP48 interfaces.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 15 CPU Protection Configuration
165