Virus-Scan Protect Shutdown-Port; Virus-Scan Set - Zte ZXR10 Command Manual

ZXR10 Command Manual (Security Volume)
Syntax
Description
Defaults
Instructions
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Purpose
Command Modes
48 Confidential and Proprietary Information of ZTE CORPORATION
automatic
manual
It is manual restore by default.
� This command is applied to ZXR10 T240G/T160G/T64G/T40G
and ZXR10 3900/3200 only.
� It is used after the virus scan monitor is enabled. If it is re-
stored manually, the no shutdown command will be used on
the shutdown port for restore.
� When it is restored automatically, The port is scanned every
10 minutes after it is shutdown. This port is restored if there
is no abnormity.
virus-scan protect
shutdown-port
Use this command to enable/disable the protection of virus scan
monitor reactive ports by shutting down them.
Global configuration
virus-scan shutdown-port {enable | disable}
enable
disable
This command is disabled by default.
�
This command is applied to ZXR10 T240G/T160G/T64G/T40G
and ZXR10 3900/3200 only.
� After the virus scan monitor is enabled, the abnormal ports are
scanned every one minute. If the shutdown abnormal port is
enabled, this abnormal port will be shut down with an alarm
sent and logs recorded.
�
When this function is disabled, only an alarm is sent for the
abnormal port.

virus-scan set

Use this command to enable the virus scan and monitor function.
Global configuration
Automatic restore
Manual restore
Enables the virus scan to shutdown abnormal
ports
Disables the virus scan to shutdown abnormal
ports