Radius Isp Client - Zte ZXR10 2900E Series Command Reference Manual

Parameters
Parameter
<ispname>
add
delete
<A.B.C.D>
<0-65535>
Default
The default UDP port is 1812.
Example
The following example describes how to add authentication server 10.40.89.78 into test
ISP domain. The default port number is used.
zte(cfg-nas)#radius isp test add authentication10.40.89.78

4.20.34 radius isp client

Purpose
Configures the RADIUS client end address.
Command Mode
NAS configuration mode
Syntax
radius isp <ispname> client <A.B.C.D>
Parameters
Parameter
<ispname>
<A.B.C.D>
Usage Guidelines
As RADIUS client end, the switch communicates with the server. Generally, configure as
the layer 3 interface address of the switch.
SJ-20120409144109-003|2012-07-02(R1.0)
Description
ISP name
Adds an authentication server in the ISP domain
Deletes an authentication server in the ISP domain
The IP address of authentication server
The UDP port of authentication server
Description
ISP name
Client end IP address
4-367
Chapter 4 Service Configuration
ZTE Proprietary and Confidential