ZXR10 2900E Series Command Reference
Command Mode
SNMP configuration mode
Syntax
set trap macnotification {port<1-52>| trunk<1-15>}{enable|disable}
Parameters
Parameter
port
<1-52>
trunk
<1-15>
enable
disable
Example
The following example describes how to enable the function of the MAC address change
notification trap on port 3, port 5, and port 8.
zte (cfg-snmp)#set trap macnotification port 3,5,8 enable
5.4.15 set trap macnotification history-size/interval
Purpose
Configures the maximum number of entries in the MAC notification history table and the
threshold of the interval that MAC change notification traps are sent.
Command Mode
SNMP configuration mode
Syntax
set trap macnotification {history-size<1-256>| interval<1-3600>}
SJ-20120409144109-003|2012-07-02(R1.0)
Description
Specified port number.
One port number. Different devices have different port number
ranges. Here, take the 2952E as an example.
Specified trunk number.
Trunk ID.
Enables the function of the MAC address change notification trap
on the specified port or trunk.
Disables the function of the MAC address change notification trap
on the specified port or trunk.
5-18
ZTE Proprietary and Confidential