Installing On Windows Xp - Multitech MultiConnect Cell User Manual

INSTALLING DEVICE DRIVERS

Installing on Windows XP

Note: If you previously installed USB drivers for this device, uninstall them before installing or re-installing this
driver. Uninstall all existing drivers for this device. Refer to Uninstall Windows Drivers for details.
Before you connect the device (disconnect the device if you connected it):
1. Click Next and follow the instructions in the installation wizard.
2. Click Continue Anyway each time this screen appears.
3. Click Finish.
4. Connect USB cable from the device to a USB port on your computer. After it detects the hardware,
Windows opens the New Hardware Wizard.
5. Select No, not this time and click Next.
6. Select Install the software automatically (Recommended) and click Next.
7. Select Finish.
8. Repeat for each additional New Hardware Wizard. Windows indicates when the device is ready to use.
20
®
MultiConnect Cell User Guide