Part Names And Functions; Front / Top; Control Panel - Epson dreamio EH-R4000 User Manual

Part Names and Functions

Front / Top

•
Control panel (side)
See below
•
Air inlet (air filter)
p.65, 69
This draws in air for cooling
the inside of the projector. If
dust collects on the filter, the
temperature inside the
projector will rise and
problems with operation or
more rapid deterioration of the
optical components may occur.
The air filter should be cleaned
periodically.
•
Front adjustable feet
Extend to adjust the projection
angle so that the projector is
horizontal when placed on a
desk top.
•
Lens cover
When not using the projector, attach this to the
lens to protect the lens from damage and dirt.

Control panel

Buttons with no explanation function in the same way as the corresponding buttons on the remote
control. Refer to "Remote control" for further details on these buttons.
•
Power button
•
Menu button
•
Lens button
Electronically adjusts the focus,
zoom and lens shift.
6
•
p.17
•
Projection lens
Projects images from here.
•
Operation indicator
p.14, 15
p.30
p.16
Remote control light-receiving area
Receives signals from the remote control.
•
Remote control light-receiving area
Receives signals from the remote control.
•
p.54 Warning indicators
Flash or light in different colors to indicate
problems with the projector.
K
•
buttons
p.13
•
Lamp cover p.70
Open this cover when replacing the
lamp inside.
•
Air exhaust vent
A discharge outlet for the air
for cooling the inside of the
projector.
Do not place anything that can
become warped or damaged by
heat near the exhaust vents. Do
not bring your hands or face
close to the vents while
projection is in progress.
•
Front adjustable feet
Extend to adjust the projection angle
so that the projector is horizontal
when placed on a desk top.
p.54
•
Source button
Switches the input source
each time you press this
button.
•
Esc button
•
Enter button
p.17
p.13
p.15