Projecting Images At A Preset Lens Position; Saving, Loading, Deleting And Renaming Lens Position - Epson dreamio EH-R4000 User Manual

Projecting Images at a Preset Lens Position

The Focus, zoom and lens shift adjustment results can be stored as a setting file in the memory of
projector. (Save Lens Position)
The stored settings can be loaded easily, so that you can enjoy watching images without adjusting the
focus, zoom, and lens position. (Load Lens Position)
You can change the default names of the stored setting files, so that you can easily find your desired one
from the list of the setting files. (Rename Lens Position)

Saving, Loading, Deleting and Renaming lens position

Save Lens Position
The current zoom, focus and lens shift settings will
be saved.
Up to three setting files can be stored.
k
Press
Lens Position".
The Save Lens Position screen will be displayed.
Select "Memory1", "Memory2" or
"Memory3", and then confirm the selection.
The current settings are stored in the selected
memory.
If you select the memory in which you have
already stored settings, a confirmation message
will be displayed.
If you select "Yes", the previous settings will be
overwritten with the current settings.
28
and select "Memory" - "Save
Saving, Loading, Deleting and
Renaming lens position
Loading Adjustment Values
The stored settings can be retrieved.
k
Press and select "Memory" - "Load
Lens Position".
The Load Lens Position screen will be
displayed.
Select the desired lens position name.
The zoom, focus and lens shift will be
adjusted to the selected lens position
settings.
While adjustment is in progress, a message
will be displayed and the projector cannot be
operated.
About "Load Lens Position"
This does not guarantee that
TIP
the stored settings are fully
reproduced. Some differences
may occur.