INTRODUCTION Atlona Technologies’ new Mini DVI, model AT-DVIF20SR, (Sender and Receiver) is a low cost Fiber Optic HDMI extender. These extremely small form factor, UL/CE approved units will carry DVI video signal and HDCP/DDC information through a single multimode fiber allowing any HD source to extend signal up to 400m (1320FT) at WUXGA (1920x120 @ 60Hz) or HDTV resolutions 1080p/1080i/720p.
2. Connect (SC type) Multimode fiber from Sender unit to Receiver by connecting one unit’s fiber optical port to the others. 3. Connect the AT-DVIF20SR (Transmitter) DVI video input to the DVI video source. 4. Next, connect the AT-DVIF20SR (Receiver) DVI video output directly to the DVI video receiv-...
Use only accessories recommended by ATLONA to avoid fire, shock or other Do not modify the wall plug. hazards. Doing so will void the warranty and safety features.
Product, or repair or replacement of the Product that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of Customer’s receipt. This Limited Warranty is void if failure of the Product has resulted from accident, abuse, or misapplication.
At Atlona, we respect and protect your privacy and assure you that your registration information is completely secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited warranty rights. To register go to www.atlona.com/registration...
Need help?
Do you have a question about the AT-DVIF20SR and is the answer not in the manual?
Questions and answers