Operation - Ozito THIRD SHEET SANDER Instruction Manual

OPERATION

4. ON/OFF SWITCH
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
1. Connect the tool to the mains power supply.
2. T o turn the sander on, slide the switch forward.
CAUTION: GUIDE THE CORD DURING SANDING TO
PREVENT IT BEING CAUGHT ON THE WORKPIECE,
OR OTHER OBJECTS.
2. T o turn the sander off, slide the switch back.
5. SANDING
1. Secure the material to be sanded.
2. Firmly grasp the sander. Turn it on and let the motor build up to
maximum speed. Gradually lower it onto the workpiece using a
forward movement.
3. F or optimum results, use backward and forward strokes.
Note: Keep the entire sanding pad in contact with the workpiece at
all times during sanding.
TSS-3100