Subscribe to Our Youtube Channel
Related Manuals for Ozito OZPBS280WA
Summary of Contents for Ozito OZPBS280WA
- Page 1 Palm Belt Sander 280 Watt Operation Manual 3 Year Replacement Warranty OZPBS280WA 0408 0509 www.ozito.com.au To view the full range visit:...
-
Page 2: Specifications
SPECIFICATIONS - MODEL NO. OZPBS280WA Motor size: 280W Input: 230-240V~ 50Hz No load speed: 400m/min Belt Size: 40mm x 303 mm (1 " x 12") Weight: 1.3kg Features: Ergonomic design Dust collection bag Belt tracking Soft grip handle Palm grip design... -
Page 3: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS ………………………………………… Page 2 TABLE OF CONTENTS…………………………………... Page 3 INTRODUCTION…………………………………………. Page 4 SAFETY INSTRUCTIONS………………………………... Page 5 TOOL OPERATION……………………………………… Page 8 MAINTENANCE …………….…………………………… Page 10 CONTENTS ………………………………………………. Page 11 WARRANTY……………………………………………….. Page 12... -
Page 4: Introduction
The electric motor has been designed for 230V and 240V only. Always power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. This tool is double insulated in accordance with AS/NZS60745;... -
Page 5: Safety Instructions
GENERAL SAFETY INSTRUCTIONS Warning! Read all instructions, Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “Power Tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. - Page 6 GENERAL SAFETY INSTRUCTIONS (cont.) e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- Page 7 ADDITIONAL SAFETY INSTRUCTIONS FOR BELT SANDERS Recommendation for the use of a residual current device with a rated residual current device of 30mA or less for extra protection against electric shock. Unplug the sander before changing accessories. Accidental start-ups may occur if the sander is plugged in while changing an accessory.
-
Page 8: Tool Operation
TOOL OPERATION BE SURE TO DISCONNECT THE BELT SANDER FROM THE POWER SUPPLY BEFORE INSTALLING OR REMOVING THE SANDING BELTS Removing and Installing Sanding Belts TO REMOVE BELT: 1. Place the palm belt sander on its left side with the belt release lever (7) facing upwards. - Page 9 TOOL OPERATION (cont.) Once the belt stabilizes you can begin operation. In some cases the belt will require a slight re-adjustment after operating for a period of time. Note the tracking carefully during the first minutes of operation and readjust if required. Operation Prior to turning on the palm belt sander ensure you hold the rubber palm grip (2) firmly and that the sanding belt is not in contact with the work.
-
Page 10: Maintenance
Note: Ozito Industries will not be responsible for any damage or injuries caused by repairing of the sander by an unauthorised person or by mishandling of the tool. -
Page 11: Contents
Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. CONTENTS 1 x Palm Belt Sander OZPBS280WA 1 x Sanding Belt 1 x Operation manual 1 x Dust collection bag OZITO INDUSTRIES PTY LTD... -
Page 12: Warranty
PURCHASED FROM: ________________________________________________ DATE PURCHASED: ________________________________________________ 3 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void.
Need help?
Do you have a question about the OZPBS280WA and is the answer not in the manual?
Questions and answers