Download Print this page
Ozito Power X Change PXTSS-018 Instruction Manual

Ozito Power X Change PXTSS-018 Instruction Manual

Cordless 1/3 sheet sander

Advertisement

Quick Links

CORDLESS 1/3
SHEET SANDER
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
No Load Speed:
12,000/min
Oscillating Speed: 24,000/min
Paper Size:
184 x 92mm (1/3 Sheet)
Paper Fitment:
Clamp or Hook & Loop
Adaptor Size:
Ø35mm
Weight:
1.21kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
STANDARD EQUIPMENT
Cordless 1/3 Sheet Sander
80 Grit Sandpaper, Paper
Punch Plate, Dust Bag & Dust
Extraction Adaptor
PXTSS-018
0620

Advertisement

loading

Summary of Contents for Ozito Power X Change PXTSS-018

  • Page 1 Clamp or Hook & Loop Adaptor Size: Ø35mm Weight: 1.21kg ozito.com.au PXTSS-018 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    2. Press the hook & loop side of BATTERY & CHARGER the sandpaper firmly against This tool is compatible with all batteries & chargers from the Ozito Power X Change the sanding pad. range. ONLINE MANUAL...
  • Page 3: Dust Extraction

    2. DUST EXTRACTION Using The Wire Clamps WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE Normal sheets of sandpaper at various grits can also be trimmed to size and PERFORMING ANY OF THE FOLLOWING TASKS. used with this unit.
  • Page 4: Operation

    OPERATION 3. STARTING THE SANDER 4. USING THE SANDER Fitting The Battery Pack WARNING! THIS PRODUCT IS NOT RECOMMENDED FOR SANDING DRYWALL OR 1. Slide the battery into the battery seating until it clicks into place. PLASTER DUE TO THE ULTRA-FINE SANDING PARTICLES PRODUCED.
  • Page 5: Maintenance

    Service: out of children’s reach. Australia 1800 069 486 Note: Ozito Industries will not be responsible for any damage or New Zealand 0508 069 486 injuries caused by repair of the tool by an unauthorised person or by E-mail: enquiries@ozito.com.au...
  • Page 6: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New The power supply for this products charger should be protected by a residual current device (rated Zealand.