Advertisement
BACK COVER
PRINTER'S NOTE:
production back cover
is to be printed with gray
scale front cover; this is a
place marker cover.
Jan 2009 MI-1010/1510-EDP
Excalibur
AL-1010-EDP
AL-1510-EDP
INSTALLATION
INSTRUCTIONS
FRONT COVER
PRINTER'S NOTE:
production front cover
is gray scale; this is a
place marker cover.
COPYRIGHT 2009: OMEGA RESEARCH & DEVELOPMENT, INC.
&
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Excalibur AL-1010-EDP
Summary of Contents for Excalibur AL-1010-EDP
- Page 1 Excalibur AL-1010-EDP & BACK COVER AL-1510-EDP PRINTER’S NOTE: production back cover is to be printed with gray scale front cover; this is a INSTALLATION place marker cover. INSTRUCTIONS FRONT COVER PRINTER’S NOTE: production front cover is gray scale; this is a place marker cover.
- Page 2 Programming Features .................. 32 Programmable Features Matrix ..............33 The AL-1010-EDP’s transmitters and the AL-1510-EDP’s 1-way transmitter and 2-way controller are pre-programmed at the factory to operate the system. If adding or replacing transmitters or controllers, please see the Opera- tion Guide booklet for Transmitter and Controller programming.
- Page 3 - IMPORTANT - Universal Relay Diagram The AL-1010-EDP is a 1-way security system, and the AL-1510-EDP is the same, except it is Pin 86 and Pin 85 are the relay’s Coil pins. prepackaged as a 2-way system. This installation (+) Positive and (-) Negative 12 volts on these pins activate the relay.
-
Page 4: Complete Programmable Features Matrix
8 Open Door Bypass to above ON (L) OFF (U) 1) Contained within the 2-way transceiver unit, as with the AL-1510-EDP. 2) Or as separate items, as with the AL-1010-EDP, which can be mounted 9 Confirmation Chirps ON (L) OFF (U) exc. -
Page 5: Programming Features
OEM-antitheft bypass when adding an alarm or an optional feature’s first option. The siren will chirp once when this button is pressed. accessory remote start module with the Excalibur. Omega offers the industries most • Pressing the “disarm/unlock” button also typically turns the feature off;... -
Page 6: Wiring Connections
pressing the “arm/lock” or “disarm/unlock” button. Only the output itself Wiring Connections will stop- pressing either button again will normally operate the system, and at any time after the 28 second lock output period ends. If either of the programmable outputs are set for lock or unlock operation (the next - NOTE - two Programmable Features), the settings if this feature will operate the program- mable outputs accordingly, in addition to the system’s primary DLS port doorlocking... - Page 7 Options: the ignition switch, the supply wire behind the fuse block or the fuse/junction block. Panic press “disarm/unlock” button to program Never just insert the Red wire or any other security system wire behind a fuse. Also, press “II” button to program 4th Channel please note that connecting directly to the battery's Positive terminal will expose this press “III”...
- Page 8 When this feature Digital Multimeter (DMM) should be used. is programmed on, the Excalibur has remote keyless entry operation only. The starter wire will read Positive 12 Volts only when ignition key is in "start"...
-
Page 9: Secondary Wiring Harness
Pulsed Horn High and horn together. Connect the Brown wire to the siren and connect the Brown/ It is important to understand that the Excalibur has a primary audible output, for Black wire to vehicle horn as described above. the electronic siren; and that it also has a programmable output which among its applications is being used to sound the vehicle’s existing horn. - Page 10 Caution: Before lengthening the Alarm 1 2 3 4 5 6 1 2 3 4 5 6 Excalibur 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6...
- Page 11 time that the ignition switch is turned on. An exception to this would be if feature Green Wire - (Negative Door Trigger): The Green wire is an "open #8 is turned on, and a door being open when the ignition switch is turned on. The door"...
- Page 12 The correct wire for a Positive switching type of dome light/door jamb pin Feature #3 Automatic Rearming switch system will have 12 volts present when the doors are opened, and chassis Factory Default Setting ground when the doors are closed. press “arm/lock”...
- Page 13 Feature #1 SecureCode Green or Violet wire is connected to, for the door trigger. If the vehicle uses a Negative switching interior light system, the activation wire Factory Default Setting 1 Press Options: will have no voltage present and show chassis ground when the doors are opened, 1 to 9 presses, in each of two stages and up to 12 volts when the doors are closed.
- Page 14 If the vehicle system’s operations, so the programming and operation of each are described. is equipped with a usable trunk or hood circuit, locate the proper wire and splice the The Excalibur AL-1010-EDP and AL-1510-EDP are: Programmable Features Blue wire directly to the vehicle's wire.
-
Page 15: Data Port
Do not place the exposed end too close to metal structural parts of the vehicle. The AL-1010-EDP can be upgraded to be a two-way system, in essence mak- ing it identical to the AL-1510-EDP, by the addition of an optional Echo 2-way kit. - Page 16 (White 2-Pin Connector) Both Excalibur models feature backup battery capability. Included with each is 3 Wire Negative Pulse Systems are typically indicated by the presence of a slide-on clip mounting bracket and a snap-cap wiring harness for an optional three wires at the switch.
- Page 17 3 Wire Positive Pulse Systems are very similar to the Three Wire Negative 5 Wire Reversal Rest At Ground Systems differ from the Negative and Pulse system except the vehicle's doorlock switches use 12 volt positive pulses to Positive Pulse systems as there are no relays or doorlock control unit. In this type operate the vehicle's doorlock relays or control unit.
- Page 18 The AL-1510-EDP is a 2-way security system, which Module includes a 1-way transmitter and a 2-way controller. Status Light The AL-1010-EDP is a 1-way system, including two transmitters. The AL-1010-EDP may be upgraded to 2-way operation by using an optional Omega Echo kit. Valet Switch...
Need help?
Do you have a question about the AL-1010-EDP and is the answer not in the manual?
Questions and answers