Elite Screens Spectrum Tension Series User Manual

Electric Motorized Projection Screen
Spectrum Tension Series

Important Safety Precautions

Make sure to read this user's guide and follow the procedures below prior to screen operation.

Please retain this user's guide for future reference.

To avoid damaging the unit, do not use with any accessories/triggering sources not recommended
or specified by the manufacturer.

Handle the unit carefully during transportation to avoid any damages.

To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.

The power outlet supplying power to the unit should be close to the unit and easily accessible.

Do not install the unit on uneven or inclined surfaces.

Do not hang any objects on the power cord and position the cord properly to avoid tripping over it.

Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short
circuit.

There are no user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself.
No one except authorized technicians can open the casing and make repairs to this unit.

Make sure that the power source this unit is connected to has a continuous power flow.

If there is need for use of an extension cord, make sure the cord has an equal rating as the electrical
device to avoid overheat.

Do not handle the power cord when your hands are wet or your feet are in contact with water.

Unplug the power cord during extreme weather conditions such as heavy rain, gusty winds, thunder
or lightning.

Avoid direct Sunlight, moisture/rain to this unit.

Do not mount near high temperature environments to prevent this device from overheating.

Cut off the power supply first before transportation or maintenance.

Fully disconnect from the power supply when the unit is not in use for a long period of time, as
should be done with any other electrical household appliance.

To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is
obvious damage or if there are any evident broken parts.
WARNING
The screen's deployment is already set from the factory to drop to its maximum distance. There is NO extra
black masking on the roller to allow for a lower drop. Please be aware of this as making adjustments to the
screen's limit motor will void your warranty if the motor becomes faulty. Unapproved changes or
modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and
will void your warranty. For more information, please contact our Technical Support Department at
(877) 511-1211 Ext. 604.
Rev.052114-JA
User's Guide
1 www.elitescreens.com