Editing Object Flags - SMART Notebook SE User Manual

To apply an image as
a fill to an object
To edit object flags
71 | CH A P T E R 7 – E DI T I NG A N D E R A S I N G O B J E C T S
1. If the Properties tab isn't visible, click Properties
2. Click Fill Effects.
3. Click Fill .
4. Select Image Fill.
5. Click Browse.
The Insert Image File dialog box appears.
6. Browse to, and select, the image you want to use, and then click Open.
7. To apply the fill to an object, click the object.
8. Repeat step 7 as many times as you want.

Editing Object Flags

You can associate one or more colored flags with an object. You can then filter the
binder to display only .notebook files that include a particular flag, enabling you to find
important items quickly. These flags appear in the top left corner as a colored square
and each flag represents a word or words.
You can add flags to objects or remove them at any time.
NOTE
• If you cut or copy an object, and then paste it on another page or in another
file, the new object has the same flags as the original object.
• If you hover over a flag in the Properties tab, the words the flag represents
appear as a tool tip. For information on editing flag labels, see page 20.
1. Select the object.
2. If the Properties tab isn't visible, click Properties
3. Click Object Flags.
The object's current flags appear with a black border in the Properties tab.
4. If you want to add a flag to an object, select the colored flag.
5. If you want to add more flags to the object, repeat step 4.
6. If you want to remove a flag, select the colored flag again.
7. If you want to remove more flags from the object, repeat step 6.
99-00965-20 A0
.
.