SMART Notebook SE User Manual page 126

To create a recording
11 8 | CH A PT ER 15 – U S I N G S M A RT T O O L S
1. Change SMART Recorder settings to configure the recording's quality, video
format, file location and watermark.
2. To record the entire screen, click Record
OR
To record a screen area, click the down arrow next to the Record button
SMART Recorder, select Record Area, and then draw a rectangle around the
area you want to record.
OR
To record a window, click the down arrow next to the Record button
SMART Recorder, select Record Window, and then select the window you want
to record.
3. Perform the on-screen actions you want to record. If you've connected a
microphone to your computer, speak into your microphone.
The SMART Recorder window displays the time elapsed during the recording and
a colored dot indicates the expected quality of your recording, based on the
current settings.
4. If you want to pause your recording, click Pause
resume recording, click Record
5. After you complete the actions you want to record, click Stop
Recorder.
The Save As dialog box appears.
NOTE
If you want to exit without saving your recording, click Cancel, click Yes to
confirm deletion, and then ignore the remaining steps of this procedure.
6. Type a file name.
7. If you want to save the recording in a different location, browse to the
new location.
8. Click Save.
The Completing Capture dialog box appears while SMART Recorder creates the
video file.
99-00965-20 A0
in SMART Recorder.
in SMART Recorder. To
in SMART Recorder.
in
in
in SMART