Starting Smart Notebook Se - SMART Notebook SE User Manual

To start
SMART Notebook SE
To start
SMART Notebook SE
using the bracelet
2 | CH A P T E R 1 – I NT R O DU CI NG S M A R T N O TE BO O K S E

Starting SMART Notebook SE

When you start SMART Notebook SE, the SMART Notebook SE window appears.
This window provides a number of ways to view and interact with files.
NOTE
You can work with more than one .notebook file in the same SMART Notebook
SE window. However, you can only open one SMART Notebook SE window.
Click Start > All Programs > SMART Technologies > SMART Notebook SE >
SMART Notebook SE.
The SMART Notebook SE window appears.
1. Connect the SMART Notebook SE bracelet to an available USB connector on
the computer.
A Removable Disk window appears.
2. Select SMART Notebook SE, and then click OK.
The SMART Notebook SE window appears.
NOTE
– When you finish using SMART Notebook SE, save all of the open files
before disconnecting the bracelet from the computer.
– When you connect the bracelet to your computer, the computer's
operating system assigns it two removable drives. The first drive contains
SMART Notebook SE software; you're unable to save files to or delete
them from this drive. The second drive contains the .notebook files you
created with SMART Notebook SE software. You can save any files to
this second drive. Both drives must be assigned for the software to run. If
you connect the SMART Notebook SE bracelet to your computer and the
two partitions aren't assigned, please see
SMART Support site. If both partitions are assigned, but SMART
Notebook SE doesn't start automatically, please see
99-00965-20 A0
document 133805 on the
document 133959.