Table of Contents
Advertisement
installer selectable features
To enter the Installer Selectable Features grid follow the instructions for the User
Selectable Features with the exception of step 4. Perform step 4 as described below
to enter the Installer Selectable Features grid.
Hold/Chirp/Release - After entering the PIN code, press and hold
chirps once. Continue holding for approximately 10 seconds until the siren chirps
three times, then release the button. You have now entered the feature selection posi-
tion of the Installer Selectable Features grid.
First
Press
Then
Press
single
single
off
*
P1 = Pulsed channel output is disabled with the ignition on or the alarm is
armed.
**
P2 = Pulsed channel output works anytime.
*** Only with optional IntelliStart connected.
**** Only with optional SmartWindows connected.
© 2004 directed electronics, inc.
off
0.8
off
P1
until the siren
P1
P1
petrol
pulsed
off
47
Hide quick links:
Advertisement
Table of Contents
