Table of Contents
Advertisement
system features programming
This system has many features that can be programmed to accommodate the user's
personal preferences and make system installation easier. They are listed in two pro-
gramming grids on the following pages. Many features have default settings that have
been programmed at the factory and are indicated in bold type.
The User Selectable Features grid allows the user and installer to change operational
features through the PlainView 2 Valet. The Installer Selectable Features grid allows
the installer to change input/output functions of the system to integrate with the vehi-
cle's specific characteristics.
cliffnet wizard pro installation software programming
Cliffnet Wizard Pro provides access to all available system features and some that are
not available when manually programming with the Valet switch. Cliffnet Wizard Pro
is compatible with Microsoft Windows 95/98/2000/ME/XP/NT so most program-
ming operations can be accomplished by pointing and clicking with a mouse. This
eliminates the need for programming grids and lengthy programming sequences. For
a complete guide to system programming using the Cliffnet Wizard Pro refer to the
Cliffnet Wizard help menu.
manual programming instructions
Be sure to document changes by taking note of all feature changes made in program-
ming mode.
To enter the User Selectable Features programming:
1.
Ignition on - Turn the ignition to the run position or start the engine.
2.
Enter PIN - Enter the factory preset PIN code of 2 by pressing
PlainView 2 Valet switch twice, then
N N O O T T E E : : If the factory preset PIN has been changed, the new PIN must be entered.
3.
Hold/Chirp/Release - After entering the PIN code, press and hold
chirp is heard and the LED turns on, then release the button. You have now
entered the feature selection position of the User Selectable Features grid.
4.
Column select - Press
a pause the siren will chirp the same number of times as the selected column for
confirmation.
5.
Feature select - Press
siren will chirp with each press. The feature can now be changed using the
remote control.
© 2004 directed electronics, inc.
once.
the same number of times as the desired column. After
the same number of times as the desired feature. The
on the
until a
41
Hide quick links:
Advertisement
Table of Contents
