H1 Primary Harness Wire Connection Guide; Primary Harness Wiring Diagram - Clifford AvantGuard 5 Installation Manual

Autostart mode.
Button three times, then
These buttons adjust the dual-zone omnisensor.
Button three times, then
These buttons adjust the dual-zone radar sensor.

H1 primary harness wire connection guide

primary harness wiring diagram

___
H1/1
BLACK
___
H1/2
BROWN
___
H1/3
GRAY
___
H1/4
EMPTY
___
H1/5
GREEN/WHITE
___
H1/6
WHITE/BLUE
___
H1/7
BLUE
___
H1/8 VIOLET
___
H1/9 GREEN
___
H1/10 RED
___
H1/11
BROWN
___
H1/12 WHITE/RED
___
H1/13 WHITE
___
H1/14 WHITE
___
BLACK/WHITE
H1/15
___
RED/WHITE
H1/16
___
ORANGE
H1/17
___
EMPTY
H1/18
© 2004 directed electronics, inc.
Button
Button
Ground
Speaker Output 1
(-) Hood Trigger Input Zone 6
Not Used
(-) Normally Closed Input - Zone 6
(-) Accessory B Output (200mA)
(-) Trunk Trigger Input - Zone 5
(+) Door Trigger Input - Zone 4
(-) Door Trigger Input - Zone 4
(+) 12V Constant
Speaker Output 2
Light Flash Input
Light Flash Output
Light Flash Output
Dome Light Supervision Output 30
(-) Accessory Output A (200mA)
Ground When Armed (500mA)
Not Used
9