Clifford AvantGuard 5 Installation Manual page 46

silent mode
The transmitter channel programmed into this feature will arm/disarm the
system, but the siren will not chirp.
remote valet
The transmitter channel programmed into this feature will make the system
enter/exit valet mode.
remote start
This feature is only available with IntelliStart connected
The transmitter channel programmed into this feature will activate or shut down
the Intellistart remote start system.
window control
This feature is only available with SmartWindows connected.
The transmitter channel programmed into this feature will activate the vent or roll
down feature of the SmartWindows system.
accessory c output
The transmitter channel programmed into this feature will activate the accessory
output.
clear all remotes
This feature will erase all remote codes from the system memory. This feature is
convenient for erasing any transmitters that have been lost, stolen, or incorrect-
ly programmed into the system.
After entering this feature press any button on the transmitter; the siren will chirp
to indicate that all transmitters have been erased from memory.
46
www.directed.com