Table of Contents
Advertisement
table of zones
When using the diagnostic functions, use the Table of Zones to see which input has
triggered the system. It is also helpful in deciding which input to use when connecting
optional sensors and switches.
N N O O T T E E : : The Warning Zone response does not report on the LED.
LED Flashes
Trigger type
3
Mux
4
Instant
5
Instant
6
Instant
7
Instant
8
Mux
10
N/A
system features programming
This system has many features that can be programmed to accommodate the user's
personal preferences and make system installation easier. They are listed in two pro-
gramming grids on the following pages. Many features have default setting that have
been programmed at the factory and are indicated in bold type.
The User Selectable Features grid allows the user and installer to change operational
features through the PlainView 2 Valet. The Installer Selectable Features grid allows
the installer to change input/output functions of the system to integrate with the vehi-
cle's specific characteristics.
cliffnet wizard pro installation software programming
Cliffnet Wizard Pro provides access to all available system features and some that are
not available when manually programming with the Valet switch. Cliffnet Wizard Pro
is compatible with Microsoft Windows 95/98/2000/ME/XP/NT so most program-
ming operations can be accomplished by pointing and clicking with a mouse. This
eliminates the need for programming grids and lengthy programming sequences. For
a complete guide to system programming using the Cliffnet Wizard Pro refer to the
Cliffnet Wizard help menu.
24
Input description
Sensor input (Blue wire)
Door Pin
Hood/Trunk Pin
Hood (only with IS4)
Ignition
Sensor 2 Input (Orange wire)
Alarm power reset
www.directed.com
Hide quick links:
Advertisement
Table of Contents
